The IPL Acoustics S5TL Kevlar Ribbon is a large Transmission Line using the excellent  new 10" IPL/10/K Kevlar bass unit   with its high sensitivity, heavy cast chassis, smooth response, and massive (7"")  magnet, and ultra light but stiff  Kevlar/paper cone, and the high performance 5" IPL/5/M magnesium coned unit with its  superbly smooth but detailed sound, and the superb  new IPL Rt1.3M Ribbon tweeter . The sound quality of this speaker which has been developed with high quality components is quite exceptional with a stunning large scale presentation, and a clarity and transparency equivalent to that of the best of speakers, but with the advantage of the extended but very controlled, dynamic, transmission line bass. The Mk 2 version of this speaker has a larger Coupling Volume resulting in an even more extended and controlled bass

The S5tl Kevlar Ribbon  is best suited to large rooms (at least 20 by 12ft,  best firing the length of the room at least 12" from rear wall and 16" from side wall), and is a superb blend of;- ambience, detail, and transparency thus demanding good partnering equipment. The bi-wired crossover uses 2nd order slopes and incorporates IPL Polypropylene capacitors, Super power and steel laminate inductors, and high powered resistors. The speaker has been designed to give near perfect linearity and phase response. The total kit contains the same 16 panel per speaker cabinet kit which includes separate sand filled spiked stands and shaped grille panel, internal baffles and deflectors. The speaker is damped with Profiled foam, and long haired wool and is fully tuneable to suit your system and room. Now with magnetic grill covers for a cleaner look.

GET INFO

I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font. 

IPL ACOUSTICS S5TL KEVLAR   £2250.00 Complete finished pair of speakers inc IPL kit (min room size 20x12')

S5TL Kevlar                            £1999.00

Dimensions 1087H (inc. stands) x 320W x 385D

Sensitivity db....91

Impedance ohms...8

IPL/10/K Kevlar  IPL/5/M magnesium matched HiVi IPL Rt1.3M Ribbon tweeter

Frequency Response...22hz-30khz

Min Room size 20' x 12'

Recommended Amplifier power 20 -1000 watts

 

OPTIONS

Flush mounted drives FOC not recomended with grille in place grille not supplied. Switchable 3 leval treble £50.00

NOT iQ BUILT PICTURE FROM IPL ACOUSTICS

10" IPL/10/K Kevlar bass unit with its high sensitivity, heavy cast chassis, smooth response, and massive (7")  magnet, and ultra light but stiff Kevlar/paper cone, and the high performance 5" IPL/5/M magnesium coned unit with its  superbly smooth but detailed sound. IPL's driver's have been genuinely researched to give smooth response and excellent sound quality at very competitive cost. These drivers are not a compromise, they are beautifully made and packaged and will compete with the best.

 

HiVi IPL Rt1.3M Ribbon tweeter Neodymium magnets. The advantage of the ribbon is that it has 10 times the force to mass ratio that a dome tweeter would have, and so is faster and more detailed. The Fountek are some of the best and most consistent Ribbon tweeters available, having a transparent but not harsh sound quality

DRIVE UNITS

CROSSOVERS

The new improved Bi-wired crossover located on the back of speaker connector panel and uses superb quality IPL and MKP PP capacitors, super power steel laminate inductors inductors and large stable audiophile resistors. Soldered using high silver content solder and a single core cable using 19 strands of 0.29mm  SILVER PLATED HIGH PURITY COPPER with a conductor area of 1.4mm and a PTFE dielectric is used to conect the drivers to the crossover. It is also used for the Hi Low link on the external conectors.

PLINTHS AND OPTIONS

IPL Pro have developed a few options to add a high end look and feel. The M1TLM can be specified with additional plinth finished in Piano Gloss Black on Veneer finishs or Solid hardwood on Laqured finished speakers.