IPL ACOUSTICS M3M RIBBON   £820.00    Complete finished pair of speakers inc IPL kit (min room size10'x10') 

M3M RIBBON £620.00

Dimensions mm .......450hx170wx242d

Sensitivity db....87

Impedance ohms..........8

Drivers IPL/5/M matched Fountek CD1 ribbon tweeters

Frequency Response...38hz-30khz

Min Room size 10' x 10'

Recommended Amplifier power 40 -1000 watts

 

 

The IPL Acoustics M3M Ribbon is a very high quality 11 litre ported speaker using the superb IPL5M magnesium cone bass unit , with its cast chassis, light but very stiff cone and large shielded magnet system, and the excellent high resolution Fountek Cd1.0 Ribbon tweeter (the tweeters are matched specifically for each kit sold ) . This speaker has a ruler flat response extending from 37htz right through to 30khtz.. The M3M  has a very sturdy cabinet made from 18 and 22mm MDF , a double flared port, and is internally lined with profiled acoustic foam. The second order crossover  uses high quality polypropylene IPL capacitors, High powered inductors and resistors, has provision for bi-wiring, using the gold CP4L connection panels supplied with the plus kit. The M3Ms make superb Hi-Fi Monitors as well as AV speakers. The Bass inductors are the superb IPL Steel Laminate Cored low resistance inductors  giving a superior bass quality with these metal units.

The sound quality of this speaker is large scale and very musical providing a clean, clear sound and a smooth but dynamic and detailed presentation with no listener fatigue. There is provision to adjust the treble and the M3Ms can be used as rear (and main) with the AVC3 centre (same units) or with the M3tlm Ribbon (same units) as main speakers in a high quality AV system. Now with magnetic grill covers for a cleaner look.

HiVi Research IPL/5/M with its magnesium cone and cast chassis are superb quality and represent the latest advances in driver technology.  IPL driver's has been genuinely researched to give smooth response and excellent sound quality at very competitive cost. These drivers are not a compromise, they are beautifully made and packaged and will compete with the best.

 

 

 

 

 

 

 

 

 

 

 

Fountek CD Neo 1Ribbon tweeter with metal face plate, aluminium ribbons, neodymium magnets results in superb sound reproduction. The advantage of the ribbon is that it has 10 times the force to mass ratio that a dome tweeter would have, and so is faster and more detailed. The Fountek are some of the best and most consistent Ribbon tweeters available, having a transparent but not harsh sound quality

DRIVE UNITS

CROSSOVERS

The new improved Bi-wired crossover located on the back of speaker connector panel and uses superb quality IPL and MKP PP capacitors, super power steel laminate inductors inductors and large stable audiophile resistors. Soldered using high silver content solder and a single core cable using 19 strands of 0.29mm  SILVER PLATED HIGH PURITY COPPER with a conductor area of 1.4mm and a PTFE dielectric is used to conect the drivers to the crossover. It is also used for the Hi Low link on the external conectors.

GET INFO

I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font.