The IPL Acoustics S2tlm Ribbon is a compact transmission line with a larger coupling volume than the original S3tlm and the driver placed above the bass mid unit resulting in an improved performance in smaller and more awkward rooms. The S2tlm Ribbon uses the superb   IPL/6/M  with its ultra light but stiff magnesium cone, smooth response, sturdy cast chassis , and large shielded magnet assembly, and  the excellent RT1.3WE Ribbon tweeter; The RT1.3 WE ribbon  is a very high quality unit with high strength NEODYMIUM magnets. .The advantage of the ribbon is a far better mass to magnetic flux ratio, over most dome tweeters giving a fast and transparent sound. Both Tweeters are matched for response and sensitivity.

The S2tlm Ribbon is a further development of the S3tlm giving; the same large scale, open sound quality, a very natural midrange, and an extended bass. The treble has an ambience and sense of realism which is seldom heard with conventional tweeters.  All this is obtained without harshness ensuring that this is a speaker you can listen to all day without fatigue. The SPL response is extremely smooth and extended giving a well balanced and natural sound . The bi-wired crossover is 2nd order at 3.0 khz, and incorporates high quality  IPL Polypropylene capacitors in the treble leg ,  IPL top quality Steel laminate IPL bass inductors,  air cored treble inductors, and high power resistors. Line damping is with IPL"s profiled acoustic foam, and  Long Haired wool. for fine tuning. Now with magnetic grill covers for a cleaner look.

GET INFO

I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font. 

IPL ACOUSTICS S2TLM RT1.3WE £1499.00   Complete finished pair of speakers inc IPL kit (Min room size14x12')

S2TLM RT1.3WE         £1299.00

903H x 230W x 310D

Sensitivity db....88

Drivers IPL/6/M  RT 1.3 WE ribbon tweeters

Frequency Response...28hz-30khz

Frequency Linearity + or - 1.5db (250 to 20khz)

Min Room size 14' x 12'

Recommended Amplifier power 15 -1000 watts

 

OPTIONS

Standard Veneer inc in Price

High Gloss Finish add £100.00

 

High Gloss Plinths inc Brass or Silver Spikes add £50.00

 

Hand Polished Aluminium Outriggers with Brass or Silver Spikes add £75.00

 

NOT iQ BUILT PICTURE FROM IPL ACOUSTICS

S2tlm Ribbon uses the superb  IPL/6/M  with its ultra light but stiff magnesium cone, smooth response, sturdy cast chassis, and large shielded magnet assembly.

DRIVE UNITS

The  Ribbon tweeter; is  the HiVi RT 1.3WE ribbon which is a very high quality unit with high strength  NEODYMIUM magnets, ensuring a  fast and transparent sound.

CROSSOVERS

The new improved Bi-wired crossover located on the back of speaker connector panel and uses superb quality IPL and MKP PP capacitors, super power steel laminate inductors inductors and large stable audiophile resistors. Soldered using high silver content solder and a single core cable using 19 strands of 0.29mm  SILVER PLATED HIGH PURITY COPPER with a conductor area of 1.4mm and a PTFE dielectric is used to conect the drivers to the crossover. It is also used for the Hi Low link on the external conectors.